Anderson Metals Space Heater Tube Nut, Nominal Size: 3/8 in, 1000 psi, Temperature Rating: 73 deg F, Brass Bagged with flag tag

9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.

Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many...

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rustproof and maintenance-free, lightweight and easy to install. NDS has a full line of drainage products, fittings and accessories available....

A53 galvanized grade B hot roll electric weld.

Anderson Metals Pipe Connector, Nominal Size: 3/8 in, Compression x Female Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing

Lasco Pipe Nipple, Nominal Size: 3/4 in, Schedule Rating: SCH 80, PVC, 24 in L

Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI,...

Anderson Metals Pipe Tee, Nominal Size: 1 in, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Harvey™ MP-6 multi-purpose clear cement and purple primer kit has what you need to complete a successful solvent weld. MP-6 is a medium-bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings. Purple primer softens bonding surfaces of...

Convenient project pack contains 4 oz purple primer and 4 oz. blue PVC wet set cement. For most wet condition projects. Twin pack.

Holds pop-up plugs and basket strainers in position and prevents rotation during installation.

Series 1003 designed for clay to asbestos cement fiber or ductile iron. Specially formulated PVC compound positively seals any sewer and drain connection. Connects clay pipe to asbestos cement or ductile iron pipes Resistant to chemicals, ultraviolet rays, fungus growth and normal sewer gases...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term...

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID.

Use with pipe and connecting fittings where a drain basin is not needed or where space doesn't allow the use of a basin. Use with corrugated single wall pipe, triple-wall pipe, leach pipe or PVC pipe. ADA compliant. Dual wall, SDR 35, 2729 S&D....

Will cut 1-1/4 to 10 in nominal PVC schedule 40 pipe. Features a 3 in shaft and hardened steel blade with a 1-1/4 in Dia. Used to cut drain stubs to floor lever or repair broken pipes. Includes a quick disconnect feature for use...

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight....

Bronze body and compression nut, stainless steel pipe gripper. Water service fittings union ring compression Lead-free Stainless steel pipe gripper

Vertical switch, 115 V, 10 ft cord, CSA and CUS listed, energy-efficient PSC motor, rustproof impeller, 1-1/2 in FNPT discharge pipe, 3/8 in maximum solid handling. Rugged cast iron construction for longer pump life with energy efficient PSC motor for smoother, quiet operation Reliable,...

Elkhart Products 104 Pipe Adapter, Nominal Size: 1-1/2 in, Sweat x MNPT Connection, Copper

Vertical switch, 115 V, 10 ft cord, CSA and CUS listed, energy-efficient PSC motor, rustproof impeller, 1-1/2 in FNPT discharge pipe, 3/8 in maximum solid handling. Rugged cast iron construction for longer pump life with energy efficient PSC motor for smoother, quiet operation Reliable,...

115 V, 10 ft cord, CSA and CUS certified, 170 gpm capacity, energy-efficient PSC motor, rustproof impeller, 2 in NPT discharge pipe, 2 in maximum solid handling. Rugged, cast iron construction for longer pump life Energy-efficient PSC motor for smoother, quieter operation Rust-proof impeller...

Hercules® Megaloc® is a multi-purpose thread sealant made with DuPont™ Kevlar® for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc® wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle....

One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed edges provide positive...

For smoothing pipes to create secure connections.

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, NPT Connection, 890 psi, Operating Temperature: 200 deg F, Brass, 2 in L, Suitable for: Brass, Copper and Iron Pipes

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.

General Tools #858 PVC pipe cable saw is ideal for cutting PVC pipe in a confined area. The cable saw is great for pipes that are against walls, between rafters or anywhere else where a normal cutter will not fit. This durable saw is...

Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.

Anderson Metals Pipe Elbow, Nominal Size: 3/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

Canplas Street Pipe Elbow, Nominal Size: 4 in, Spigot x Hub Connection, Angle: 45 deg, ABS, Black

Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic, may be used on water, natural gas, steam and air lines. Ideal for applying gaskets to flanges. Not for use on plastic threads. Pipe joint compound is a firm, smooth sealing compound formulated...

Anderson Metals Tube Elbow, Nominal Size: 3/8 x 1/2 in, Angle: 90 deg, 1000 psi, Operating Temperature: 73 deg F, Brass

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger...

one of the largest and most diversified lines of PEX tools that includes both domestic and import, stainless steel clamp (SSC) and copper ring, one-handed, compact, long-handle and composite handle crimp tools, pipe cutters and ring/clamp removal tools.

Canplas Adapter Pipe Bushing, Nominal Size: 4 in, Spigot x Hub Connection, ABS, Black

Anderson Metals Tube Elbow, Nominal Size: 3/8 x 1/2 in, Angle: 90 deg, 1000 psi, Operating Temperature: 73 deg F, Brass

arrowhead Washing Machine Valve, 1/2 x 3/4 in Connection, FIP x Male Hose Threaded Connection, 125 psi, Actuator Type: T-Handle, Temperature Rating: 180 deg F, Body Material: Bronze Alloy, Satin/Nickel Heavy-duty lead-free bronze Various configurations and connections with 1/2 in pipe inlet Exclusive one...

Oatey® PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used...

Oatey® PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used...

Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12 in Dia with interference fit, up to 18 in for non-pressure. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD...

Medium bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various...

Oatey® PVC medium-bodied fast set clear cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used to...

Oatey® PVC Medium Bodied Fast Set Clear Cement is recommended for DWV, pressure pipe, potable water and electrical applications. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This clear, fast set cement can be used...

Oatey® PVC regular-bodied fast set clear cement is recommended for DWV, pressure pipe, potable water and electrical applications. It is easy to apply with included in-lid dauber and its clear color provides a clean finish. This regular-bodied, fast set cement can be used to...

1/3 hp split capacitor motor, high efficiency, low amp draw, corrosion-resistant plastic, 10 ft grounded waterproof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115V...