Filter
238 results
50
- 10
- 15
- 20
- 25
- 30
- 50
Best selling
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Vendor: COMSTAR
ComStar Copper Lock Series 10-801 No Heat Solder, 10 mL Tube, Liquid, -60 to 300 deg F Melting Point
Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good...- $13.40
- $13.40
- Unit price
- / per
-
Vendor: STANLEY
Stanley PAA44-1B Pop Rivet, Reusable, 1-5/8 in L, Aluminum
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $5.20
- $5.20
- Unit price
- / per
-
Vendor: ARROW
Arrow RL100K Rivet Tool Kit, 1/8, 3/16 in Rivet, Non-Slip Grip Handle, Steel
The RL100K rivet kit is the ideal starter kit for DIY consumers and the occasional rivet user. The kit comes with our all-purpose RL100S rivet tool, two interchangeable nose pieces, a nose changing wrench and 50 of our two most popular rivets, 25 each...- $18.92
- $18.92
- Unit price
- / per
-
Vendor: DEWALT
DeWALT DWHTTR350 Staple and Brad Tacker, 100 Magazine, 27/64 in W Crown, 1/2 to 9/16 in L Leg, Orange
The heavy-duty staple and brad tacker can be squeezed easily, has an AntiJam™ mechanism to help prevent misfires and is made of aluminum which is lightweight and durable. Easy-squeeze technology helps reduce actuation force Also uses full range of Stanley® TRA700 Series heavy-duty staples...- $27.03
- $27.03
- Unit price
- / per
-
Vendor: DEWALT
DeWALT DWHTHT450 Hammer Tacker, 150 Magazine, 27/64 in W Crown, 1/2 to 9/16 in L Leg, Black/Orange
Lightweight die-cast aluminum housing design for durability. Anti-jam magazine prevents jams and misfires. Heavy-duty stapling mechanism for durability. Surface guard to prevent damage to underlayment material. Ergonomic design is weighted forward for comfortable use. Uses DeWALT® DWHTTH700 series heavy-duty staples, available sizes of 5/16...- $35.00
- $35.00
- Unit price
- / per
-
Vendor: DEWALT
DeWALT DWHTTR510 5-in-1 Multi-Tacker, 1000 Magazine, Round Crown, Flat Crown, Narrow Flat Crown Staple, 1/2 in W Crown
The 5-in-1 multi-tacker can be easily squeezed, has an AntiJam™ mechanism to help prevent misfires and is made of aluminum which is lightweight and durable. Easy-squeeze technology helps reduce actuation force Lightweight die-cast aluminum housing design for durability Also uses full range of Stanley®...- $33.91
- $33.91
- Unit price
- / per
-
Vendor: IRWIN
Irwin 2026303 Bench Vise, 4 in Jaw Opening, 4-1/2 in W Jaw, 2-3/8 in D Throat, Cast Iron/Steel, Pipe Jaw
Irwin Bench Vise, Jaw Type: Pipe, Jaw Opening Size: 4 in, Jaw Width: 4-1/2 in, Throat Depth: 2-3/8 in, Base Type: Stationary, Cast Iron/Steel, Enamel, Blue Captured safety jaw to prevent slide from falling out Integrated pipe jaws Fused steel handle- $40.45
- $40.45
- Unit price
- / per
-
Vendor: IRWIN
Irwin 2025102 C-Clamp, 10 lb Clamping, 2-1/2 in Max Opening Size, 1-3/8 in D Throat, Steel Body, Blue Body
Double-rolled thread for faster clamping and increased durability; large swivel pad reduces marring on work surface and increases stability, large handle for greater clamping pressure with less effort. Double-rolled thread provides greater clamping speed Large swivel pad reduces marring on work surface and increases...- $5.90
- $5.90
- Unit price
- / per
-
Vendor: IRWIN
Irwin 2025101 C-Clamp, 10 lb Clamping, 1-1/2 in Max Opening Size, 1-1/2 in D Throat, Steel Body, Blue Body
Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...- $3.92
- $3.92
- Unit price
- / per
-
Vendor: IRWIN
Irwin 2024100 Pipe Clamp, Clamping Range: 3/4 in, Ergonomic Handle, Steel
Larger feet offer more stability and clearance between handle and worktop; larger, more ergonomic handle offers easier clamping with reduced hand fatigue, larger clutch plates allow for easier release and increased durability and dependability. Innovative clutch system eliminates the need for threaded pipe Large...- $33.28
- $33.28
- Unit price
- / per
-
Vendor: RAMSET
Ramset 00810 Washered Pin, 0.145 in Dia Shank
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...- $9.24
- $9.24
- Unit price
- / per
-
Vendor: IRWIN
Irwin QUICK-GRIP 1964712/2021412N Bar Clamp/Spreader, 600 lb, 12 in Max Opening Size, 3-5/8 in D Throat
With 600 lb of sustained clamping pressure/holding force, the Irwin® QUICK-GRIP® XP600 (Extreme pressure) is the most powerful one-handed Bar clamp Available. It is ideal for heavy-duty applications such as installation, demolition and rough glue-up. Dual-locking swivel jaws with removable, non-marring full-face pads provide...- $29.58
- $29.58
- Unit price
- / per
-
Vendor: ERICO
nVent ERICO CWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Silicone Bronze
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe, ground rods, or flexible gas pipe with brass hex fittings SH version for outdoor applications- $7.74
- $7.74
- Unit price
- / per
-
Vendor: BERNZOMATIC
BernzOmatic TS4000ZKC Torch Kit, Includes: TS4000 Torch and 14.1 oz MAP-Pro Cylinder
Compatible with MAP-Pro® and propane, the project possibilities are endless. This torch kit is ideal for projects such as large diameter soldering, wood burning projects, brazing and cooking thanks to the continuous flame lock and pressure regulator features. Kit includes high-heat torch head and...- $56.65
- $56.65
- Unit price
- / per
-
Vendor: BERNZOMATIC
BernzOmatic TS99T Swivel Torch
A 360 deg vertical swivel torch head and trigger-start igniter provide easy, one-hand accessibility to soldering and brazing jobs in tight spaces. Optimized swirl flame provides hot, fast, efficient heat. Features a trigger starter for easy ignition and an adjustable flame control knob. Pressure...- $66.82
- $66.82
- Unit price
- / per
-
Vendor: BERNZOMATIC
BernzOmatic TS8000BZKC Torch Kit, Propane, Trigger Igniter, 3400 deg F Propane, 3600 deg F MAPP
BernzOmatic® max performance torch kit includes one max performance torch and one 14.1 oz BernzOmatic® MAP-Pro® cylinder. The torch is built with instant on/off ignition, an adjustable, ultra-swirl flame and flame lock option for continuous use. It is pressure regulated for consistent performance when...- $63.11
- $63.11
- Unit price
- / per
-
Vendor: BERNZOMATIC
BernzOmatic TS4000 High Heat Torch, Aluminum
Compatible with MapPro® and propane, the project possibilities are endless. This torch is ideal for projects such as large diameter soldering, wood burning projects, brazing and cooking thanks to the continuous flame lock and pressure regulator features. Pressure regulated for consistent inverted use Efficient...- $47.77
- $47.77
- Unit price
- / per
-
Vendor: BERNZOMATIC
BernzOmatic TS8000 Max Heat Torch, Aluminum
Versatility is the name of the game. With a fully adjustable flame and the compatibility of MapPro® and propane fuels the project possibilities are endless. With a continuous flame lock and pressure regulator, this torch is ideal for a multitude of projects such as...- $57.31
- $57.31
- Unit price
- / per
-
Vendor: RAMSET
Ramset 00747 Drive Pin, 0.145 in Dia Shank, 3/4 in L, Steel, Zinc
Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools- $10.29
- $10.29
- Unit price
- / per
-
Vendor: IRWIN
Irwin 225106 C-Clamp, 900 lb Clamping, 6 in Max Opening Size, 3-1/2 in D Throat, Steel Body, Blue Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Double-rolled thread for faster clamping and increased durability Larger swivel pad reduces...- $11.40
- $11.40
- Unit price
- / per
-
Vendor: IRWIN
Irwin 225105 C-Clamp, 10 lb Clamping, 5 in Max Opening Size, 3-1/4 in D Throat, Steel Body, Blue Body
Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...- $12.81
- $12.81
- Unit price
- / per
-
-
-
-
Vendor: ARROW
Arrow T50 Series 505IP Staple, 3/8 in W Crown, 5/16 in L Leg
For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.- $12.84
- $12.84
- Unit price
- / per
-
Vendor: OATEY
Oatey 53016 Rosin Core Solder, 1/4 lb Carded, Solid, Silver, 361 to 460 deg F Melting Point
Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana...- $17.38
- $17.38
- Unit price
- / per
-
Vendor: STANLEY
Stanley PAA42W-1B Pop Rivet, Reusable, 1-1/2 in L, Aluminum, 100/PK
Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...- $8.57
- $8.57
- Unit price
- / per
-
Vendor: OATEY
Oatey 20015 Leaded Solder, 1 lb, Solid, Silver, 361 to 421 deg F Melting Point
Oatey® wire solder is a tin-lead alloy wire solder commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana or Pennsylvania- $46.22
- $46.22
- Unit price
- / per
-
Vendor: RAMSET
Ramset 1512SDA Washered Pin, 0.145 in Dia Shank
With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...- $11.05
- $11.05
- Unit price
- / per
-
Vendor: KREG
Kreg KHCRA Clamp, 5 in Max Opening Size, Metal Body
The right-angle clamp makes projects with 90 deg joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the right-angle clamp into a...- $43.66
- $43.66
- Unit price
- / per
-
Vendor: KREG
Kreg KHCCC Corner Clamp, 90 deg Clamping Angle, Cast Aluminum/Steel Body
The Kreg® 90 deg corner clamp gives you the helping hand you need to hold 90 deg corners and T-joints together securely when you're assembling boxes, drawers, cabinets and cases. Plus, the 90 deg corner clamp leaves both of your hands free to add...- $51.55
- $51.55
- Unit price
- / per
-
Vendor: KREG
Kreg KHC3 Project Clamp, 3 in Max Opening Size, 3 in D Throat, Metal Body
Wood Project clamps are perfect for Kreg Joinery, project assembly, general clamping and more. These versatile clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces. They are compatible with the Kreg Jig® R3's clamp pad Adapter and the...- $42.63
- $42.63
- Unit price
- / per
-
Vendor: KREG
Kreg KHC6 Project Clamp, 6 in Max Opening Size, 6 in D Throat, Metal Body
Wood Project clamps are perfect for Kreg Joinery, project assembly, general clamping and more. These versatile clamps have large clamp faces that distribute clamping force evenly and won't mar delicate surfaces. They are compatible with the Kreg Jig® R3's clamp pad Adapter and the...- $47.96
- $47.96
- Unit price
- / per
-
Vendor: AMERIMAX
Amerimax 84025 Gutter Rivet, 1-1/2 in L, Aluminum, 100/PK
Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction.- $8.18
- $8.18
- Unit price
- / per
-
Vendor: OATEY
Oatey 50692 Wire Solder Kit, 1 oz 1 oz, Solid
Oatey Wire Solder Kit, Net Content: 1 oz, 1 oz, Solid, Compositions: 60 - 100% Tin, 1 - 5% Copper, 1 - 5% Bismuth, 1 - 5% Silver, Specific Gravity: 9 - 11, Applicable Materials: Bismuth, Copper, Tin- $49.60
- $49.60
- Unit price
- / per
-
Vendor: COMSTAR
ComStar Copper Lock Series 10-800 No Heat Solder, 2 oz Tube, Liquid, -60 to 300 deg F Melting Point
Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good...- $22.49
- $22.49
- Unit price
- / per
-
-
-
-
-
-
Vendor: DEWALT
DeWALT 52000-PWR Powder Actuated Tool, 1/PK
The P3500 is a low velocity, semi-automatic 0.27 caliber tool which can be used to install 0.3 in head drive pins, 8 mm head drive pins and 1/4 -20 threaded studs, up to 3 in total length. The P3500 is designed for high-speed, durability...- $328.74
- $328.74
- Unit price
- / per
-
Vendor: DEWALT
DeWALT 50116-PWR Drive Pin with Washer, 0.145 in Dia Shank, 3 in L, Steel/Plastic, Zinc
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...- $15.34
- $15.34
- Unit price
- / per
-
Vendor: DEWALT
DeWALT 50040-PWR Drive Pin, 0.145 in Dia Shank, 2-1/4 in L, Steel/Plastic, Zinc
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...- $13.44
- $13.44
- Unit price
- / per
-
Vendor: DEWALT
DEWALT 50026-PWR Powder Actuated Pin, 0.145 in Dia Shank, 1 in L
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete- $8.22
- $8.22
- Unit price
- / per
-
Vendor: DEWALT
DeWALT 50113MG-PWR Drive Pin with Washer, 0.145 in Dia Shank, 2-1/2 in L, Steel/Plastic, Galvanized
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...- $26.93
- $26.93
- Unit price
- / per
-
Vendor: DEWALT
DEWALT 50022-PWR Powder Actuated Pin, 0.145 in Dia Shank, 3/4 in L, Steel/Plastic
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete- $6.27
- $6.27
- Unit price
- / per
-
Vendor: DEWALT
DeWALT 50115MG-PWR Drive Pin with Washer, 0.145 in Dia Shank, 3 in L, Steel/Plastic, Galvanized
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...- $27.21
- $27.21
- Unit price
- / per
-
Vendor: DEWALT
DeWALT 50114-PWR Drive Pin with Washer, 0.145 in Dia Shank, 2-1/2 in L, Steel/Plastic, Zinc
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...- $15.20
- $15.20
- Unit price
- / per