Clamp brass or poly crimp fittings onto PEX or PE-RT pipe. The clamp ring is tightened using a PEX clamp tool to make a secure connection.

Connect pieces of same sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems. Made from premium lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless steel clamp rings Minimum...

Eastman Gas Connector, 1/2 in Nominal, MIP Connection, Stainless Steel, Epoxy-Coated, 18 in Length, 1/2 in OD, Yellow

Eastman Gas Log Connector and Installation Kit, Includes: (1) 3/8 in ID x 24 in L Black Epoxy-Coated Stainless Steel Gas Connector, (1) 1/2 in OD x 1/2 in MIP Steel Fitting, (1) 1/2 OD x 1/2 in FIP Steel Fitting, (1) 1/2 OD...

Eastman EZ-20 Gas Connector, 1/2 in Nominal, FIP x MIP Connection, 304 Stainless Steel, Epoxy-Coated, 48 in Length, 1/2 in OD, Yellow Yellow epoxy-coated 304 Series stainless steel Provides extra protection from corrosion, household chemicals and plumbing repair products Zinc-plated steel S45C fittings

Eastman Gas Connector, Nominal Size: 3/8 x 1/2 in, FIP x MIP Connection, Stainless Steel, Epoxy-Coated, 24 in L, 1/2 in Dia Outside, 3/8 in Dia Inside

Eastman Gas Connector, Nominal Size: 3/8 x 1/2 in, FIP x MIP Connection, Stainless Steel, Epoxy-Coated, 36 in L, 1/2 in Dia Outside, 3/8 in Dia Inside

Eastman EZ-20 Gas Connector, 1/2 in Nominal, FIP x MIP Connection, 304 Stainless Steel, Epoxy-Coated, 36 in Length, 1/2 in OD, Yellow Yellow epoxy-coated 304 Series stainless steel Provides extra protection from corrosion, household chemicals and plumbing repair products Zinc-plated steel S45C fittings

Eastman Gas Dryer Connector and Installation Kit, Includes: (1) 3/8 in ID x 48 in L Thermal Excess Flow Valve, (1) Epoxy-Coated Stainless Steel Gas Connector, (1) 1/2 in OD x 1/2 in MIP Steel Fitting, (1) 1/2 OD x 1/2 in FIP Steel...

Eastman Gas Connector, Nominal Size: 3/8 x 1/2 in, FIP x MIP Connection, Stainless Steel, Epoxy-Coated, 60 in L, 1/2 in Dia Outside, 3/8 in Dia Inside

Eastman Gas Connector, Nominal Size: 1/2 in, FIP x MIP Connection, Stainless Steel, Epoxy-Coated, 48 in L, 1/2 in Dia Outside, 3/8 in Dia Inside

Eastman EZ-20 Gas Connector, 1/2 in Nominal, FIP x MIP Connection, 304 Stainless Steel, Epoxy-Coated, 24 in Length, 1/2 in OD, Yellow Yellow epoxy-coated 304 Series stainless steel Provides extra protection from corrosion, household chemicals and plumbing repair products Zinc-plated steel S45C fittings

Eastman EZ-20 Gas Connector, 1/2 in Nominal, FIP x MIP Connection, 304 Stainless Steel, Epoxy-Coated, 60 in Length, 1/2 in OD, Yellow Yellow epoxy-coated 304 Series stainless steel Provides extra protection from corrosion, household chemicals and plumbing repair products Zinc-plated steel S45C fittings

PEX bend supports allow for 90 deg bends to be made with PEX tubing which can eliminate the need for additional fittings in certain instances, reducing the amount of potential leak points in a plumbing system. Bend supports also help to reduce noise and...

Connect pieces of same sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems. Connects to PEX pipe with copper crimp rings or stainless steel clamps Certified for potable and radiant heating applications

SharkBite® PEX pipe is a cross-linked polyethylene pipe for use in a wide range of residential and commercial plumbing applications. Manufactured without an oxygen barrier for potable water systems and with an oxygen barrier for radiant floor and hydronic heating applications. A repeating SharkBite®...

SharkBite Manifold, Number of Outlets: 6, Inlet Connection Size: 3/4 in, Inlet Connection Type: Barb, Outlet Connection Size: 1/2 in, Outlet Connection Type: Barb, 160 psi, Operating Temperature: 200 deg F, Copper, Suitable for: PEX and PERT Pipes

SharkBite Adapter, 3/4 x 1 in Nominal, Barb x MIP Connection, 200 psi Pressure, 200 deg F Operating, Brass, 1 in Length

Used to connect two different sizes of PEX pipe together using crimp or clamp rings. Compatible with PEX and PE-RT pipe Made from lead-free DZR EcoBrass Connects to PEX pipe with copper crimp rings or stainless steel clamps Minimum working temperature 33 deg F...

SharkBite Manifold, Inlet Connection Size: 3/4 in, Inlet Connection Type: Barb, Outlet Connection Size: 3/4 in, Outlet Connection Type: Barb, 160 psi, Operating Temperature: 33 to 200 deg F, Copper, Suitable for: PEX Pipe Four open port 1/2 in barb branch 1 in long...

This ProSource water meter key is used for turning off/on water supply valves. It has a black painted finish with blue dip-coated handle.

Insulating tubes made of closed cell polyethylene foam or rubber, these foam pipe covers will slip over your pipes quickly and easily. They come in sizes to fit all sizes of pipes.

Insulating tubes made of closed cell polyethylene foam or rubber, these foam pipe covers will slip over your pipes quickly and easily. They come in sizes to fit all sizes of pipes.

Insulating tubes made of closed cell polyethylene foam or rubber, these foam pipe covers will slip over your pipes quickly and easily. They come in sizes to fit all sizes of pipes.

Eco-Flo Deep Well Jet Pump, 1-1/4 in Suction, 1 in Discharge Connection, 115/230 V, 3/4 hp, 7 gpm, 56 psi, Iron, Suitable for: 20 ft Deep Water Well Built-in overload motor, well injector kit included (well injector casting, jet nozzle, venturi tubes and hardware)...

Frost King Tubular Pipe Insulation, 6 ft L, 1/2 in Thick, Polyethylene Foam, Pipe Size: 3/4, 1 in, Suitable for: Copper Pipe/Iron Pipe

Frost King Tubular Pipe Insulation, 6 ft L, 1/2 in Thick, Polyethylene Foam, Pipe Size: 1, 1-1/4 in, Suitable for: Copper Pipe/Iron Pipe

Frost King Tee Pipe Insulation, 3/4 in Dia, 1/2 in Thick, Polyethylene Foam, Pipe Size: 1/2, 3/4 in, Suitable for: Copper Pipe/Iron Pipe

Frost King Pipe Insulation, 2 in Dia, 6 ft L, 1/2 in Thick, Polyethylene Foam, Brown, Suitable for: 2 in Copper or 1-1/2 in Iron Pipes

Frost King Tee Pipe Insulation, 1 in Dia, 1/2 in Thick, Polyethylene Foam, Pipe Size: 3/4, 1 in, Suitable for: Copper Pipe/Iron Pipe

Frost King Elbow Pipe Insulation, 1 in Dia, 1/2 in Thick, Polyethylene Foam, Pipe Size: 3/4, 1 in, Suitable for: Copper Pipe/Iron Pipe

A simple and effective way to insulate pipes of all diameters. Easy-to-use tape will insulate pipes in exposed areas and it prevents pipes from sweating. Also ideal for over-wrapping the electric heat cables kits used to prevent water pipe freezing.

Frost King Tee Pipe Insulation, 1/2 in Dia, 1/2 in Thick, Polyethylene Foam, Pipe Size: 1/4, 1/2 in, Suitable for: Copper Pipe/Iron Pipe

Frost King Insulation, 48 in L, 16 in W, 1 in Thick, Denim

Frost King Pipe Insulation, 6 ft L, 3/4 in Thick, Polyethylene, Pipe Size: 1, 3/4 in, Suitable for: 1 in Copper or 3/4 in Iron Pipe

Frost King Pipe Insulation, 6 ft L, 3/4 in Thick, Polyethylene, Pipe Size: 1/2, 1/4 in, Suitable for: 1/2 in Copper or 1/4 in Iron Pipe

Frost King Pipe Insulation, 6 ft L, 3/4 in Thick, Polyethylene, Pipe Size: 3/4, 1/2 in, Suitable for: 3/4 in Copper or 1/2 in Iron Pipe

The brass drain grate with PVC collar presents a stylish look as it drains light flows from small lawns, landscaped areas, patios and walkways. The rust and corrosion-resistant drain grate, also known as a drain cover, is fitted on a polyvinyl chloride collar that...

NDS Deck Drain, 3 in Dia, Styrene, White 3 in S and D HUB

The Danco faucet aerator removal tool is ideal for removing and installing hidden faucet aerators in specially designed faucets. This kit includes four different color coded cache aerator keys that will fit standard, junior, tiny junior and tom thumb size hidden aerators. These cache...