-
Vendor: TELL MANUFACTURING
Tell Manufacturing DT101947 Concave Door Bumper, 2-1/2 in Dia Base, 1 in Projection, Steel, Matte Black
Tell's stainless steel concave and convex wall mount door bumpers offer protection from door handles. Bumpers come in 2-1/2 in Dia with concealed mounting. The concave design accepts turn knob buttons so they will not self lock. Mounting hardware is included for easy installation....- $9.67
- $9.67
- Unit price
- per
-
Vendor: TELL MANUFACTURING
Tell Manufacturing DT101946 Dome Door Stop, 1-7/8 in Dia Base, Stainless Steel, Matte Black
Tell dome door stops are used primarily in commercial buildings. The door stop's base height is 1/8 in low or 3/8 in high to clear the bottom of most doors. The stops comes with mounting hardware for easy installation. High dome for doors with...- $12.84
- $12.84
- Unit price
- per
-
Vendor: TELL MANUFACTURING
Tell Manufacturing DT101944 Push Plate, 15 in L, 3-1/2 in W, 0.05 ga Gauge, Stainless Steel, Matte Black
Tell's push plates are made of 0.05 ga steel for durability. A brushed stainless steel finish adds a distinctive look. Packaged with mounting screws for easy installation.- $19.54
- $19.54
- Unit price
- per
-
Vendor: TELL MANUFACTURING
Tell Manufacturing DC100451 Door Closer, Aluminum, Matte
Tell Manufacturing Door Closer, 1 to 4, 3 to 6 Spring, 4-3/4 in Diameter, Aluminum, Black, Matte, 3-1/2 in Height, Includes: Hardware- $74.80
- $74.80
- Unit price
- per
-
Vendor: TELL MANUFACTURING
Tell Manufacturing DT101943 Pull Plate, 3-1/2 in W, 15 in H, Stainless Steel, Matte Black
Tell's pull plates are made of 0.05 ga steel for durability. A brushed stainless steel finish adds a distinctive look. Packaged with mounting screws for easy installation.- $43.79
- $43.79
- Unit price
- per
-
Vendor: TELL MANUFACTURING
Tell Manufacturing DT101949 Door Kick Plate, 30 in L, 6 in W, 0.05 ga Gauge, Matte Black
Tell Manufacturing Door Kick Plate, 0.05 ga, Matte Black, 30 in Length, 6 in Width- $40.07
- $40.07
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Defender Security U 10027 Latch Guard, 11 in L, 3 in W, Steel, Brass
Heavy steel latch guard for out-swinging doors. Four door bolts and raised center dome for strike lip clearance. Includes four 5/16 in x 2 in carriage bolts, washers and cap nuts.- $18.21
- $18.21
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Make-2-Fit PL 7804 Screen Frame Kit, 4 ft L x 3/4 in W Dimensions, Aluminum, Mill, 10-Piece
Prime-line 3/4 in x 5/16 in x 48 in screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame...- $19.26
- $19.26
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
AmesburyTruth TH 22253 Crank Handle, Zinc, Enamel-Coated
TH 22253 is a folding crank handle that fits onto Truth casement operators. It is die-cast with a baked enamel white finish. It offers an exceptionally low-profile when folded yet requires far less torque to operate than traditional low-profile handles. Non-handed Resists rust or...- $19.22
- $19.22
- Unit price
- per
-
Vendor: M-D
M-D 93146 Wall Base, 20 ft L, 4 in W, Vinyl, Black
This 4 in x 20 ft adhesive back wall base from M-D Building Products is ideal for finishing flooring project's perimeter where floors and walls meet. Wall base adds a clean and durable finished edge to installation projects. Flexible base for easy quick installation...- $34.30
- $34.30
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1131 Handle Set, Die-Cast/Wood, Wood, 1 to 1-1/2 in Thick Door
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners. Standard reversible surface mount handle set for left or right handed mortise locking doors Die-cast inside...- $28.61
- $28.61
- Unit price
- per
-
Vendor: M-D
M-D 05587 Door Sweep, 36 in L, 1/2 in W, Vinyl Insert
Rigid vinyl with soft vinyl sweep. Sticks to all doors. Flexible to compensate for carpet or uneven doors. 1-1/2 in H. Rigid vinyl with soft vinyl sweep Sticks to all doors Flexible to compensate for carpet or uneven doors- $6.65
- $6.65
- Unit price
- per
-
Vendor: NATIONAL HARDWARE
National Hardware N174-284 Box Rail Hanger, Steel
Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and...- $60.96
- $60.96
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line GD 12153 Cable Ferrule and Stop, Aluminum
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Extruded aluminum ferrules are...- $3.14
- $3.14
- Unit price
- per
-
Vendor: M-D
M-D TH026 81869 Sill Nosing, 36-1/2 in L, 2-3/4 in W, Silver
Energy efficiency products such as home sealing and insulation products from M-D Building Products provide the quickest and easiest return on investment for your home or business. These envelope sealing products lead the industry in both utility and style, ensuring you savings on your...- $8.96
- $8.96
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Make-2-Fit PL 7760 Top Hanger and Bottom Latch, Aluminum, Mill, For: 7/16 in Screen Frame
Prime-Line stamped aluminum top hangers and bottom latch hardware are used to install 7/16 in thick window screens to wood framed windows. Each card includes 4 top hangers and 2 bottom latch per card, 2 sets per card includes fasteners. Mill (silver) finish. Stamped...- $4.71
- $4.71
- Unit price
- per
-
Vendor: NATIONAL HARDWARE
National Hardware 77BC Series N176-271 Door Spring, 1 in ID Dia, 16 in L, Steel, Zinc
Heavy-duty spring designed for gates and screen and storm doors, as well as for projects requiring an extra-heavy spring. Looped ends for installation. Does not include hooks. Boxed. Looped ends for easy installation Four diameter sizes for various applications- $8.86
- $8.86
- Unit price
- per
-
Vendor: FROST KING
Frost King H433FB/3 Seam Binder, 3 ft L, 1-1/4 in W, Fluted Surface, Aluminum, Gold, Satin
Joins floor covering of same height. Covers seams and spaces.- $6.64
- $6.64
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line PL 14273 Square Cut Screen Frame Corner, Plastic, Bronze
Prime-Line Square Cut Screen Frame Corner, Plastic, Bronze, Dimensions: 3/8 in Square cut plastic- $27.28
- $27.28
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line M 6090 Shower Door Bottom Guide and Retainer, Sliding, Plastic, White
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling. Nylon guide and retainer pin Fits old style "Kinkead" shower doors Hook style guide tip Nylon locking key included- $9.31
- $9.31
- Unit price
- per
-
Vendor: FROST KING
Frost King H591FS/6 Carpet Bar, 6 ft L, 1-3/8 in W, Fluted Surface, Aluminum, Silver, Satin
Joins carpet with other types of flooring at a lower height. Covers seams and spaces.- $9.98
- $9.98
- Unit price
- per
-
Vendor: FROST KING
Frost King H113FB/6 Carpet Bar, 6 ft L, 1 in W, Fluted Surface, Aluminum, Gold, Satin
Joins carpet with other types of flooring at a lower height. Covers seams and spaces.- $10.16
- $10.16
- Unit price
- per
-
Vendor: M-D
M-D 87684 Garage Door Seal, 2 in W, 3/8 in Thick, 7 ft L, Vinyl, White
This unique weatherstrip is designed to be installed around the top and sides of your garage door. Flexible vinyl seal formed with firm vinyl base to provide an excellent garage door weatherstrip. Resists rotting and damage from insects. Flexible vinyl seal formed with firm...- $11.38
- $11.38
- Unit price
- per
-
Vendor: ADFORS
Adfors 10117 Screen Wire, 7 ft L, 24 in W, Aluminum, Bright
Adfors aluminum screen is strong and durable, rust-resistant and will not sag. Our aluminum screen has a protective finish that prevents corrosion and provides strength.- $7.11
- $7.11
- Unit price
- per
-
Vendor: M-D
M-D 25756 Threshold Replacement Insert, 28-1/4 in L, 2 in W, Vinyl, Black
This durable vinyl door bottom replacement insert is an easy solution to replacing your door bottom. Remove old worn inserts and replace with a new one to insure a weather tight seal. Replaces worn out vinyl inserts Fits M-D L-shaped and U-shaped door bottoms...- $5.82
- $5.82
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line N 6614 Roller Guide, Steel, White
N 6614 is a spring-loaded 7/8 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 to...- $6.56
- $6.56
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line B 522 Center Grooved Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel Roller, Concave Roller, Steel
This center grooved sliding screen door tension roller is used by many patio door manufacturers. Used on the bottom as well as the top of the sliding screen door. The roller is a 1 in steel ball bearing roller. The tension spring 2-1/2 in...- $6.29
- $6.29
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Make-2-Fit PL 8101 Top Hanger and Bottom Latch, Aluminum, Mill, For: 3/8 in Screen Frame
Prime-Line stamped aluminum top hangers and bottom latch hardware are used to install 3/8 in thick window screens to wood framed windows. Set includes 2 top hangers and 1 spine-in bail latch, 1 set per card includes fasteners. Mill (silver) finish. Stamped aluminum top...- $3.89
- $3.89
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1043 Handleset, Aluminum, Painted, For: 1 to 1-1/4 in THK Glass Sliding Doors
Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners...- $15.89
- $15.89
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line D 1754 Roller Assembly, 1-1/2 in Dia Roller, 5/16 in W Roller, Steel, 2-Roller, Plain Back Mounting
Tandem steel ball bearing rollers; adjustable steel housing assembly; housing dimensions: thickness 3/4 in; length 3-1/8 in; height 1-1/32 in. Housing width: 11/16 in. Roller edge type: Concave. Contents: 1 roller assembly. Adjustable steel housing assembly Easy to install- $18.48
- $18.48
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1058 Handle Set, Aluminum, Painted, 1-1/2 to 1-3/4 in Thick Door
Standard reversible surface mount handle set for left or right handed mortise locking doors. Hook style latch, mortise style handle, extruded aluminum inside pull has wood grain feature strip and a black die-cast outside pull designed to be used with any of the following...- $25.39
- $25.39
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1064 Handle Set, Different Key, Aluminum, Aluminum, 1 in Thick Door
Hook style latch, designed to fit 90% of all internally latched doors, reversible right or left hand openings, complete with keeper, locking unit with key, automatic unlatching options prevents accidental lockout. Designed to fit 90% of all internally latched doors Reversible right or left...- $32.16
- $32.16
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1076 Handle Set, Alike Key, Aluminum, Chrome, 1-1/4 in Thick Door
Steel hook; nite latch feature; universal design; interchangeable, reversible hooks. 4 Hook Assortment, surface-mounted latch style: Hook Style Hole Center: 6-5/8 in. Includes 1 inside latch and pull, 1 outside pull, 1 locking cylinder, 1 keeper and 1 set of installation screws. Reversible flush...- $18.95
- $18.95
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line N 6840 Door Roller, 7/8 in Dia Roller, 1/4 in W Roller, Steel, 1-Roller
N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors. Adjustable top hung side mounted design- $5.57
- $5.57
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Defender Security U 9512 Entry Door Latch Shield, 6 in L, Steel, Brass
2-Piece latch shield. For use on in-swinging doors. Interlocking brackets protect door from forced entry. Includes 1 door bracket, 1 jamb bracket, 1 set of flat head sheet metal screws, 1 set of one-way sheet metal screws and 1 set of pan head screws...- $18.73
- $18.73
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Make-2-Fit PL 7737 Window Screen Clip with Screw, Alloy, Zinc, Silver, 12/PK
The Prime-Line 7/16 in die-cast window screen clip is used to secure the window screen to the frame and is attached with a screw so that the clip can twist and latch over the screen frame. Corrosion-resistant and will not rust Installation screws include...- $7.82
- $7.82
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line H 3508 Window Operator, Right, Aluminum
The H 3508 casement window operator is a right hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the...- $20.49
- $20.49
- Unit price
- per
-
Vendor: FROST KING
Frost King TAOC36A Sill Threshold, 36 in L, 5-5/8 in W, Aluminum
Seals uneven gaps between bottom of door and floor. 1-1/8 to 1-5/16 in H. Seals uneven gaps between bottom of door and floor Thermal breaks keep cold air outside Heavy gauge aluminum exterior with oak interior- $38.80
- $38.80
- Unit price
- per
-
Vendor: ADFORS
Adfors FCS9195-M Screen Wire, 100 ft L, 48 in W, Aluminum, Black
Adfors aluminum screen is strong and durable, rust-resistant and will not sag. Our aluminum screen has a protective finish that prevents corrosion and provides strength.- $168.67
- $168.67
- Unit price
- per
-
Vendor: M-D
M-D 78022 Stair Edging, 36 in L, 1-1/8 in W, Aluminum
Fluted edging protects and improves the appearance of stair edges. 1/8 in H. Durable aluminum withstands high-foot traffic areas in the home Screw nails fit firmly in pre-drilled holes for easy installation Can be cut to desired length with hack saw Fluted silver stair...- $9.00
- $9.00
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1034 Patio Door Handle Pull, 10 in W, Wood
This is an add-on handle usually used on flush-mounted patio door handles. It has a wood handle grab that is 9-15/16 in long that fastens onto the door with chrome mounting brackets with hole centers of 6-5/8 in apart. Once the handle is installed,...- $11.77
- $11.77
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line F 2598 Tilt Latch, Plastic, White, 1/PR
Spring-loaded vinyl tilt latch, used on single or double-hung, aluminum or vinyl windows, for use on sash panels designed to tilt in and down from the top. Contains 1 left hand latch, 1 right hand latch, 1 set of installation screws. Injected molded plastic...- $4.02
- $4.02
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line C 1032 Handle Set, Alike Key, Aluminum, Wood, 1 to 1-1/4 in Thick Door
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock; reversible for left or right hand; complete with 4 different hood lengths. Includes 1 inside latch with deluxe wood pull, 1 outside pull, 1 keeper, installation fasteners, 4 hook assortment...- $29.64
- $29.64
- Unit price
- per
-
Vendor: SHEPHERD
Shepherd Hardware 3314 Wedge Door Stop, Rubber, Satin Nickel
Shepherd Hardware Wedge Door Stop, Rubber, Satin Nickel- $9.77
- $9.77
- Unit price
- per
-
Vendor: PRIME LINE PRODUCTS
Prime-Line B 543 Roller Assembly, 11/16 in Dia Roller, Polyethylene Roller, Convex Roller, 5/8 in W, 2-3/8 in H, Nylon
This sliding screen door top roller guide was used on HiLite Doors. The high density polyethylene body installs into the top of the screen door frame and is held in place by the included screw. The guide roller is a 11/16 in oval ball...- $7.04
- $7.04
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.