This complete sewer kit comes assembled with everything you'll need for a quick, reliable sewer hook-up. Nonrestrictive for free flow and faster dumping. Includes 10 ft HTS sewer hose, Easy Slip bayonet straight hose adapter and Easy Slip sewer elbow with 4-in-1 adapter. Hose...

All of the features that RVers are looking for in a complete kit. RhinoEXTREME hose will not dent or rust and will not crush if accidentally stepped on. Offers great abrasion resistance for maximum protection against pinholes and leaks. The 10 ft kit includes...

Sewer hose supports were designed to go around any obstacle and allow proper drainage. Sturdy, lightweight plastic support with strong snap fit hinges has deep cradles to hold sewer hose in place without straps. No staples to rust. Easily positions around obstacles and stays...

Moves along with power mirrors to adjust the view while sitting in the driver seat. Installation takes seconds with a twist of the knob, leaving no marks and making it easy to transfer from one vehicle to the next. 11 in L x 5-1/2...

The Camco 3 in RV sewer hose twist it clamps (2-pack) feature durable plastic construction that is UV- and rust-resistant. They tighten with convenient thumb grips, eliminating the need for other tools. 3 in maximum opening Durable plastic and resin construction that is UV...

Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4 in MPT x 3/4 in MPT x 3 in L MIP. 2-1/2 in dielectric...

Camco USA RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. Easy installation Minimum tank diameter of 9 in...

UL listed. Gasket included. Easy installation Minimum tank diameter of 9 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 9 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 9 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 10 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 12 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 14 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 15 in

Camco USA Water Heater Element Screw, Screw Connection, 208/240 V, Wattage Rating: 3500/4500 W, Copper, Nickel, Includes: Gasket Easy installation Minimum tank diameter of 15 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 11 in

UL and CSA listed. Gasket included. Easy installation Minimum tank diameter of 13 in

Camco USA's 4500 W 240 V screw-in type low watt density water heater elements are better suited for areas with problem water. Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has...

Camco USA's 2500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. They resist dry firing and are...

Camco USA's 4500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits and the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength...

Camco USA's 4500 W/240 V screw-in ripple type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits d the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength...

UL listed. Gasket included. Easy installation Minimum tank diameter of 15 in

Camco USA 1500 W universal element is designed to replace the heating element in your water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included. Easy installation Minimum tank diameter of 9 in

High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed. Easy installation Minimum tank diameter of 8 in

High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed. Four bolt flange mount Minimum tank diameter of 10 in

High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed. Easy installation Minimum tank diameter of 12 in

UL listed. Gasket included. Four bolt flange mount Minimum tank diameter of 14 in

High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed. Easy installation Minimum tank diameter of 15 in

UL listed. Gasket included. Easy installation Minimum tank diameter of 13 in

High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. 240 V. UL listed. Easy installation Minimum tank diameter of 9 in

Camco USA's 4500 W/240 V universal flange foldback lime life ultra-low watt density water heater elements are better suited for areas with problem water. Ultra LWD and special metal surface (high-performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. Excellent when water has...

Everything needed to install flat, screw-in and universal flange elements. Contains one screw-in gasket, one universal flange gasket, one four hole gasket and four 1/4-20 x 3/4 in hex bolts. Everything to install flat, screw-in and universal flange elements Replace any type of water...

Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element...

The Camco USA Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat. Energy efficient range setting Built-in safety switch prevents the...

UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. Energy efficient range setting Built-in safety switch prevents the water heater from overheating WH9 Apcom Style

UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. Energy efficient range setting Built-in safety switch prevents the water heater from overheating WH10A Apcom Style

UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Energy efficient range setting Built-in safety switch prevents the water heater from overheating All thermostats are adjustable "Therm-O-Disc" style...

Camco USA's single element Therm-O-Disc style thermostat with HLC replaces the heating element in RV water heaters. It has an energy efficient range setting and built-in safety switch to prevent overheating. It also comes complete with detailed instructions and wiring diagrams for easy installation....

UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Energy efficient range setting Built-in safety switch prevents the water heater from overheating All thermostats are adjustable "Therm-O-Disc" style...

Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four Torx-head screws and four J-style clip-on nuts.

Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.

Fits standard 1/2 in socket drive to replace screw-in water heater elements. Fits standard 1/2 in socket drive to make easy work of replacing screw-in water heater elements

The Camco USA water heater element quick change tool helps you save time and water when changing your water heater element. Instead of emptying your entire water heater tank just to change the element, simply turn off the water at the water heater to...

Test your elements and thermostats while still in the water heater. 1 piece. Test continuity of elements, thermostats and circuits Unbreakable body with protective cover over LED light Simple and easy to use

Seamless corrugated 18 in flexible copper water connectors. 125 psi maximum. Flexible design

The Copper Connector Kit is designed for use with gas systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors, one roll...

The Copper Connector Kit is designed for use with gas or electric systems. The connecting kit is used where cold supply or hot distribution lines are 3/4 in copper and not threaded. The kit includes two 3/4 in x 15 in flexible water connectors,...

The Camco USA T and P relief valve safely relieves excess temperature and pressure in your water heater. The Camco USA T and P valve is safe for use up to 150 psi and/or to 210 deg F. It has a 3/4 in inlet...

Camco USA's 3/4 in temperature and pressure valve with 4 in probe will help protect your RV or home water heater from excessive temperature and water pressure. It's factory set at 150 psi and 210 deg F. It features epoxy-coated probe to prevent corrosion...

Setting: of 150 psi/210 deg F, stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.